Prestige Steel Hopper Features
-
More
Axalta Imron Paint
Three-stage paint process consisting of a zinc coating, urethane primer and top coat.
Close -
More
Chute Opening Size
The 16" × 24" chute enables quick discharge, as well as a controlled rate of flow into an unloading auger.
Close -
More
Hopper-to-Ground Clearance
High hopper clearance allows for various sizes of swing-away augers to be used during unloading for maximum flexibility.
Close -
More
Load Equalization
Lode King’s Load Equalization system evenly distributes the weight of the load.
Close - More
-
More
Space Between Trailers
Axles are positioned to provide clearer access to the bridge, while machined aluminum steps on both sides make it safe and easy to climb onto the bridge between the lead and pull.
Close - More
-
The grain trailer of choice for many, Lode King’s Prestige line of steel hopper trailers can be built in configurations to suit both the farming community where yard space and field approaches are a factor, to commercial operators who need a longer, high volume trailer that can be used in all North American jurisdictions.
-
The grain trailer of choice for many, Lode King’s Prestige line of steel hopper trailers can be built in configurations to suit both the farming community where yard space and field approaches are a factor, to commercial operators who need a longer, high volume trailer that can be used in all North American jurisdictions.
-
The grain trailer of choice for many, Lode King’s Prestige line of steel hopper trailers can be built in configurations to suit both the farming community where yard space and field approaches are a factor, to commercial operators who need a longer, high volume trailer that can be used in all North American jurisdictions.
Features List
- Standard
-
StandardAir & Electrical Lines
Each line is easily identifiable and easy to track. All lines are safely routed through side rails and secured front and back.
-
StandardAxalta Imron Paint
Three-stage paint process consisting of a zinc coating, urethane primer and top coat.
-
StandardChute Cranks
High-mounted, angled chute cranks make access easier.
-
StandardChute Opening Size
The 16" × 24" chute enables quick discharge, as well as a controlled rate of flow into an unloading auger.
-
StandardExtra-Wide Mudflaps
4-across, full coverage 102" wide mudflaps ahead of landing gear.
-
StandardHendrickson Air Ride Suspension
The Hendrickson INTRAAX suspension combines the axle and suspension as a fully integrated unit. The larger diameter 5 3/4" axle provides superior rigidity.
-
StandardHopper Access
The front and rear are equipped with ladders to provide access to each hopper. Interior steps allow the operator into the hopper and a ladder on either side of the divider wall allows movement between the hoppers.
-
StandardHopper-to-Ground Clearance
High hopper clearance allows for various sizes of swing-away augers to be used during unloading for maximum flexibility.
-
StandardIn-Line Air Filter
The in-line air filter protects the air system from road debris build-up. The filter is serviceable and replaceable. Extends the duration of the ABS warranty.
-
StandardLarge Swing Clearance
126" from the king pin to the landing gear.
-
StandardLoad Equalization
Lode King’s Load Equalization system evenly distributes the weight of the load
-
StandardLoad Gauge Enclosure
The easily accessible air gauge box is positioned above the fenders to protect it from flying road debris.
-
StandardSelf-Cleaning Chute
The sliding track for the chute gate is designed to be self-cleaning. The chute itself slides past the fully open trap for complete clean-out.
-
StandardSlope Sheet Angles
Minimum 30° slope.
-
StandardSpace Between Trailers
Axles are positioned to provide clearer access to the bridge, while machined aluminum steps on both sides make it safe and easy to climb onto the bridge between the lead and pull.
-
StandardTarp Bows
The indented tarp bows prevent the tarp from wearing out where the built-in ridge pole crosses the roof bow
-
StandardTruck-Lite LED Lighting
A fully sealed wiring harness secured between the walls of the trailer is connected to lifetime-guaranteed Truck-Lite LED lights. 3 lighting packages available.
-
StandardUpper Coupler
The upper coupler design is one of the most robust in the industry
-
StandardWall Corrugation
Wall corrugation for higher strength.
- Optional
-
OptionalAluminum Fill Plate
Aluminum fill plate in bumper with Lode King logo.
-
OptionalAuxiliary Air Supply
An auxiliary air chuck can be installed inside the air gauge box to supply air for a pneumatic vibrator. This handy outlet can also be used to bring tire pressure up to recommended PSI.
-
OptionalBrake Drums
Lightweight options available.
-
OptionalBrake Pot Belting Ahead of Suspension
A 48.5" × 28" full-size flap can be installed in front of the first set of suspension hangers. This not only protects the hanger brackets but also provides full protective coverage for brake pots, axles and air lines.
-
Optionaldisc brakes
Hendrickson MAXX22T air disc brakes.
-
OptionalDual Chute Opening
A second chute opening, shaft and crank on the opposite side from the primary chute opening.
-
OptionalDura-Light Hub/Centerfuse Drum
Lightweight option compared to cast hub and cast drum, provides extra weight savings.
-
OptionalElectric Remote Tarp Opener
Electric wireless remote comes with a T210 handheld wireless remote control for opening your tarps along with a wall-mounted control box.
-
OptionalFront Fender
The front fender protects the area above the king pin section from road grime and snow buildup.
-
OptionalFull Coverage Mudflaps
4-across full coverage 102" wide mudflaps ahead of landing gear
-
OptionalHolland Kompensator Fifth Wheel
The Holland Kompensator fifth wheel coupled with a grease bank relieves the twisting force between trailers in tight turns on uneven terrain.
-
OptionalHubodometer
Available in either miles or kilometers.
-
OptionalLift Axles
Run-empty lift axles allow axles to be raised for no-load driving.
-
OptionalLighting
3 lighting packages available
-
OptionalLoading & Unloading Lights
LED loading and unloading lights are available
-
OptionalMud Flaps Ahead of Second Hopper
3-across mud flaps ahead of second hopper
-
OptionalPlacard Holders
Placard holders for dangerous goods labels.
-
OptionalRounded Stainless Steel Fenders
Stainless steel fenders wrap around the tire to prevent road debris being scattered by tires. The fenders are interconnected with a closure plate between them to protect the trailer.
-
OptionalSidewall Vents
Vents allow air to flow into the trailer during unloading.
-
OptionalTire Inflation System
Hendrickson TIREMAAX PRO.
-
OptionalTires
A wide range of Michelin, Bridgestone and BF Goodrich options available.
-
OptionalTow Hooks
Can also be used as a step.
-
OptionalVibrator Brackets
Vibrator brackets are mounted to the hopper.
-
OptionalWheels
22.5" and 24.5" options available in Aluminum, Dura-Bright, and Steel
#HaulWithPrestige
Own a Prestige? Tag your Prestige photos with #HaulWithPrestige on Instagram to have your photos featured here.
