Distinction aluminum hopper Specifications
-
Dimensions
-
-
- Length
- Lead - 28'6", Pull - 30'5"
-
- Exterior Width
- 102"
-
- Interior Width
- 98"
-
- Wall Height
- 82" Standard, 84" Optional
-
- Overall Height
- 144" w/ 82" Wall, 146" w/ 84" Wall
-
- King Pin
- Lead - 30" Standard, 24" Optional; Pull - 18" Standard
-
- Slopes
- 30° except 43° at Rear of Lead
-
-
-
- Length
- 45'6" or 50'
-
- Exterior Width
- 102"
-
- Interior Width
- 98"
-
- Wall Height
- 82" Standard, 84" Optional
-
- Overall Height
- 142" w/ 82" Wall, 144" w/ 84" Wall
-
- King Pin
- 15"
-
- Slopes
- Minimum 30°
-
-
-
- Length
- 40' Standard
-
- Exterior Width
- 102"
-
- Interior Width
- 98"
-
- Wall Height
- 72" Standard; 76" and 80" Optional
-
- Overall Height
- 131" w/ 72" Wall, 135" w/ 76" Wall, 139" w/ 80" Wall
-
- King Pin
- 24" Standard
-
- Slopes
- Minimum 30°
-
-
-
Volume (Cubic Feet)
-
-
- Wall Height
- Lead
- Pull
- Total
-
- -
- Water Level
- Heaped
- Water Level
- Heaped
- Water Level
- Heaped
-
- 82"
- 1239
- 1335
- 1428
- 1531
- 2667
- 2866
-
- 84"
- 1275
- 1371
- 1466
- 1570
- 2741
- 2941
-
-
Length 45'6" 45'6" 48' 50' Wall Height 82" 84" 84" 84" Water Level 1824 1881 1938 1993 Heaped 1984 2041 2098 2167 -
Width 102" 102" 96" 96" 96" Wall Height 72" 76" 72" 76" 80" Water Level 1583 1687 1486 1583 1681 Heaped 1723 1828 1616 1714 1811
-
-
Body Structure
-
-
- Coupler
- Holland 5th Wheel Standard; See Available Options
-
- Front/Rear Walls
- Double Wall Construction, 0.063" Pre-Painted Aluminum Outside Skin, White, Black, or Graphite Metallic Colour Options c/w Access Ladders and Catwalk; Radius Corners; Stainless Steel Covers Optional on Front of Lead and Rear of Pull; See Available Options
-
- Hopper Chutes
- Standard Opening Size - 24" Long x 16" Wide; Stainless Chute Shafts; Roadside Opener Standard; 22 7/8" Clearance (w/ 11Rx24.5 Rubber); See Available Options
-
- Hoppers
- Two Hoppers per Trailer; Center Divider Wall; Two-Piece Hopper Design; Two Rows of Stiffeners On All Sides; Chute Frames Bolted to Bottom
-
- Landing Gear
- Jost Magnum Aluminum Landing Gear c/w 10" Cushion Foot; 10 Year Warranty
-
- Lighting
- Seven Wire Connector at Front; Truck-Lite LED Lighting Standard; Lifetime Warranty Lamps; Truck-Lite Wiring Harness; See Available Options
-
- Mud Flaps
- 1/2" Rubber Anti-Sail Rear Flaps Standard; See Available Options
-
- Paint
- All Steel Components – Three-Stage Paint Process Consisting of a Coating of Zinc, Urethane Primer and Top Coat
-
- Side Walls
- Double Wall Construction, 00.063"" Pre-Painted Aluminum Outside Skin, White, Black, or Graphite Metallic Colour Options; Inside Finished; Walls Vented; See Available Options
-
- Slopes
- Aluminum Slope Sheets - No Less than 30°
-
- Tarps/Tarp Supports
- Michel's Roll Tarp, Reinforced over Roof Bows; Fiberglass Ridge Pole; Aluminum Roof Bows; Aluminum End Caps; Remote Openers; See Available Options
-
-
-
- Coupler
- Holland 5th Wheel Standard; See Available Options
-
- Front/Rear Walls
- Double Wall Construction, 0.063" Pre-Painted Aluminum Outside Skin, White, Black, or Graphite Metallic Colour Options c/w Access Ladders and Catwalk; Radius Corners; Stainless Steel Covers Optional on Front of Lead and Rear of Pull; See Available Options
-
- Hopper Chutes
- Standard Opening Size - 24" Long x 16" Wide; Stainless Chute Shafts; Roadside Opener Standard; 22 7/8" Clearance (w/ 11Rx24.5 Rubber); See Available Options
-
- Hoppers
- Two Hoppers per Trailer; Center Divider Wall; Two-Piece Hopper Design; Two Rows of Stiffeners On All Sides; Chute Frames Bolted to Bottom
-
- Landing Gear
- Jost Magnum Aluminum Landing Gear c/w 10" Cushion Foot; 10 Year Warranty
-
- Lighting
- Seven Wire Connector at Front; Truck-Lite LED Lighting Standard; Lifetime Warranty Lamps; Truck-Lite Wiring Harness; See Available Options
-
- Mud Flaps
- 1/2" Rubber Anti-Sail Rear Flaps Standard; See Available Options
-
- Paint
- All Steel Components – Three-Stage Paint Process Consisting of a Coating of Zinc, Urethane Primer and Top Coat
-
- Side Walls
- Double Wall Construction, 00.063"" Pre-Painted Aluminum Outside Skin, White, Black, or Graphite Metallic Colour Options; Inside Finished; Walls Vented; See Available Options
-
- Slopes
- Aluminum Slope Sheets - No Less than 30°
-
- Tarps/Tarp Supports
- Michel's Roll Tarp, Reinforced over Roof Bows; Fiberglass Ridge Pole; Aluminum Roof Bows; Aluminum End Caps; Remote Openers; See Available Options
-
-
-
- Coupler
- Holland 5th Wheel Standard; See Available Options
-
- Front/Rear Walls
- Double Wall Construction, 0.063" Pre-Painted Aluminum Outside Skin, White, Black, or Graphite Metallic Colour Options c/w Access Ladders and Catwalk; Radius Corners; Stainless Steel Covers Optional on Front of Lead and Rear of Pull; See Available Options
-
- Hopper Chutes
- Standard Opening Size - 24" Long x 16" Wide; Stainless Chute Shafts; Roadside Opener Standard; 22 7/8" Clearance (w/ 11Rx24.5 Rubber); See Available Options
-
- Hoppers
- Two Hoppers per Trailer; Center Divider Wall; Two-Piece Hopper Design; Two Rows of Stiffeners On All Sides; Chute Frames Bolted to Bottom
-
- Landing Gear
- Jost Magnum Aluminum Landing Gear c/w 10" Cushion Foot; 10 Year Warranty
-
- Lighting
- Seven Wire Connector at Front; Truck-Lite LED Lighting Standard; Lifetime Warranty Lamps; Truck-Lite Wiring Harness; See Available Options
-
- Mud Flaps
- 1/2" Rubber Anti-Sail Rear Flaps Standard; See Available Options
-
- Paint
- All Steel Components – Three-Stage Paint Process Consisting of a Coating of Zinc, Urethane Primer and Top Coat
-
- Side Walls
- Double Wall Construction, 00.063"" Pre-Painted Aluminum Outside Skin, White, Black, or Graphite Metallic Colour Options; Inside Finished; Walls Vented; See Available Options
-
- Slopes
- Aluminum Slope Sheets - No Less than 30°
-
- Tarps/Tarp Supports
- Michel's Roll Tarp, Reinforced over Roof Bows; Fiberglass Ridge Pole; Aluminum Roof Bows; Aluminum End Caps; Remote Openers; See Available Options
-
-
-
Running Gear
-
-
- Axles & Suspension
- Hendrickson INTRAAX .31" Wall, 5.75" Round, 77.5" Track, HN Spindle; Hendrickson INTRAAX AANT23K LDA Air Ride Standard; Air Gauge Mounted in an Aluminum Box c/w Window and Light. See Available Options.
-
- Brake System
- Air Drum Brake Standard; HXS-H23 Extended Service Linings Standard; Haldex 30/30 Gold Seal; Haldex S-ABA Slack 5.5"; 28 Spline Standard; Wabco ABS Equipped; See Available Options
-
- Fenders
- Lode King Checkered Aluminum Flat Fenders; See Available Options
-
- Hubs
- 10 Stud HP Cast Hub/Cast Drum Standard; See Available Options
-
- Tires
- Michelin/BF Goodrich Standard; See Available Options
-
- Wheel Seals
- National
-
- Wheels
- 22.5" Standard; See Available Options
-
-
-
- Axles & Suspension
- Hendrickson INTRAAX .31" Wall, 5.75" Round, 77.5" Track, HN Spindle; Hendrickson INTRAAX AANT23K LDA Air Ride Standard; Air Gauge Mounted in an Aluminum Box c/w Window and Light. See Available Options.
-
- Brake System
- Air Drum Brake Standard; HXS-H23 Extended Service Linings Standard; Haldex 30/30 Gold Seal; Haldex S-ABA Slack 5.5"; 28 Spline Standard; Wabco ABS Equipped; See Available Options
-
- Fenders
- Lode King Checkered Aluminum Flat Fenders; See Available Options
-
- Hubs
- 10 Stud HP Cast Hub/Cast Drum Standard; See Available Options
-
- Tires
- Michelin/BF Goodrich Standard; See Available Options
-
- Wheel Seals
- National
-
- Wheels
- 22.5" Standard; See Available Options
-
-
-
- Axles & Suspension
- Hendrickson INTRAAX .31" Wall, 5.75" Round, 77.5" Track, HN Spindle, Hendrickson INTRAAX AANT23K LDA Air Ride Standard; Air Gauge Mounted in an Aluminum Box c/w Window and Light. See Available Options.
-
- Brake System
- Air Drum Brake Standard; HXS-H23 Extended Service Linings Standard; Haldex 30/30 Gold Seal; Haldex S-ABA Slack 5.5"; 28 Spline Standard; Wabco ABS Equipped; See Available Options
-
- Fenders
- Lode King Checkered Aluminum Flat Fenders; See Available Options
-
- Hubs
- 10 Stud HP Cast Hub/Cast Drum Standard; See Available Options
-
- Tires
- Michelin/BF Goodrich Standard; See Available Options
-
- Wheel Seals
- National
-
- Wheels
- 22.5" Standard; See Available Options
-
-
-
Standard Features
-
-
- Chute Opener
- Our one-piece chute opener is built in-house at Lode King to ensure robustness and compatibility
-
- Full Coverage Mudflaps
- 4-across full coverage 102" wide mudflaps ahead of landing gear
-
- High Hopper-to-Ground Clearance
- High hopper clearance allows for various sizes of swing-away augers to be used during unloading for maximum flexibility
-
- In-Line Air Filter
- The in-line air filter protects the air system from inhaling road debris. The filter is serviceable and replaceable.
-
- Interior Access Steps
- Interior access steps are a safe and secure way to enter and exit the trailer. The operator can enter the trailer from the front or rear, then easily move between trailers.
-
- Landing Gear
- Jost aluminum landing gear with 10 year warranty
-
- Air Gauge Box
- The user-friendly air gauge box features a door with a window to monitor loading, and is equipped with an interior light. The enclosure’s positioning avoids interference with any aspect of the unloading process, yet is easily accessible to the operator.
-
- Optimal Chute Opening Size
- The 16” x 24” chute enables quick discharge, as well as a controlled rate of flow into an unloading auger
-
- Smooth Hopper Corners
- With smooth inside corners, product flows smoothly with very little remaining after unloading, saving time and effort
-
- Smooth Walls
- Smooth walls help improve the trailer’s structural integrity. Plus, they’re easier to clean and look great!
-
- Space Between Trailers
- Axles are positioned to provide clearer access to the bridge, while machined aluminum steps on both sides make it safe and easy to climb onto the bridge between the lead and pull
-
- Tapered End Walls
- Tapered end walls make opening and closing tarps easier because they increase the amount of room between the lead and pull of the Super-B. An added bonus of this design feature is the angled ladder, which makes climbing safer and faster.
-
- Tarp Bows
- The indented tarp bows prevent the tarp from wearing out where the built-in ridge pole crosses the roof bow
-
- Truck-Lite LED Lighting
- A fully sealed wiring harness secured between the walls of the trailer is connected to lifetime-guaranteed TRUCK-LITE LED lights. Up to 4 lighting packages available.
-
- Upper Coupler
- The upper coupler design is one of the most robust in the industry
-
- Vented Walls
- Vents along the lower rail allow for free air movement between the inner and outer walls. This air flow regulates the temperature and humidity differences that produce sweating and cause material to stick to the inside.
-
-
-
- Chute Opener
- Our one-piece chute opener is built in-house at Lode King to ensure robustness and compatibility
-
- Full Coverage Mudflaps
- 4-across full coverage 102" wide mudflaps ahead of landing gear
-
- High Hopper-to-Ground Clearance
- High hopper clearance allows for various sizes of swing-away augers to be used during unloading for maximum flexibility
-
- In-Line Air Filter
- The in-line air filter protects the air system from inhaling road debris. The filter is serviceable and replaceable.
-
- Interior Access Steps
- Interior access steps are a safe and secure way to enter and exit the trailer. The operator can enter the trailer from the front or rear, then easily move between trailers.
-
- Landing Gear
- Jost aluminum landing gear with 10 year warranty
-
- Air Gauge Box
- The user-friendly air gauge box features a door with a window to monitor loading, and is equipped with an interior light. The enclosure’s positioning avoids interference with any aspect of the unloading process, yet is easily accessible to the operator.
-
- Optimal Chute Opening Size
- The 16” x 24” chute enables quick discharge, as well as a controlled rate of flow into an unloading auger
-
- Smooth Hopper Corners
- With smooth inside corners, product flows smoothly with very little remaining after unloading, saving time and effort
-
- Smooth Walls
- Smooth walls help improve the trailer’s structural integrity. Plus, they’re easier to clean and look great!
-
- Tapered End Walls
- Tapered end walls make opening and closing tarps easier because they increase the amount of room between the lead and pull of the Super-B. An added bonus of this design feature is the angled ladder, which makes climbing safer and faster.
-
- Tarp Bows
- The indented tarp bows prevent the tarp from wearing out where the built-in ridge pole crosses the roof bow
-
- Truck-Lite LED Lighting
- A fully sealed wiring harness secured between the walls of the trailer is connected to lifetime-guaranteed TRUCK-LITE LED lights. Up to 4 lighting packages available.
-
- Upper Coupler
- The upper coupler design is one of the most robust in the industry
-
- Vented Walls
- Vents along the lower rail allow for free air movement between the inner and outer walls. This air flow regulates the temperature and humidity differences that produce sweating and cause material to stick to the inside.
-
-
-
- Chute Opener
- Our one-piece chute opener is built in-house at Lode King to ensure robustness and compatibility
-
- Full Coverage Mudflaps
- 4-across full coverage 102" wide mudflaps ahead of landing gear
-
- High Hopper-to-Ground Clearance
- High hopper clearance allows for various sizes of swing-away augers to be used during unloading for maximum flexibility
-
- In-Line Air Filter
- The in-line air filter protects the air system from inhaling road debris. The filter is serviceable and replaceable.
-
- Interior Access Steps
- Interior access steps are a safe and secure way to enter and exit the trailer. The operator can enter the trailer from the front or rear, then easily move between trailers.
-
- Landing Gear
- Jost aluminum landing gear with 10 year warranty
-
- Air Gauge Box
- The user-friendly air gauge box features a door with a window to monitor loading, and is equipped with an interior light. The enclosure’s positioning avoids interference with any aspect of the unloading process, yet is easily accessible to the operator.
-
- Optimal Chute Opening Size
- The 16” x 24” chute enables quick discharge, as well as a controlled rate of flow into an unloading auger
-
- Smooth Hopper Corners
- With smooth inside corners, product flows smoothly with very little remaining after unloading, saving time and effort
-
- Smooth Walls
- Smooth walls help improve the trailer’s structural integrity. Plus, they’re easier to clean and look great!
-
- Tapered End Walls
- Tapered end walls make opening and closing tarps easier because they increase the amount of room between the lead and pull of the Super-B. An added bonus of this design feature is the angled ladder, which makes climbing safer and faster.
-
- Tarp Bows
- The indented tarp bows prevent the tarp from wearing out where the built-in ridge pole crosses the roof bow
-
- Truck-Lite LED Lighting
- A fully sealed wiring harness secured between the walls of the trailer is connected to lifetime-guaranteed TRUCK-LITE LED lights. Up to 4 lighting packages available.
-
- Upper Coupler
- The upper coupler design is one of the most robust in the industry
-
- Vented Walls
- Vents along the lower rail allow for free air movement between the inner and outer walls. This air flow regulates the temperature and humidity differences that produce sweating and cause material to stick to the inside.
-
-
-
Options
-
-
- Auxiliary Air Supply
- An auxiliary air chuck can be installed inside the air gauge box to supply air for a pneumatic vibrator. This handy outlet can also be used to bring tire pressure up to recommended PSI.
-
- Brake Pot Belting Ahead of Suspension
- A 48.5" x 28" full-size flap can be installed in front of the first set of suspension hangers. This not only protects the hanger brackets but also provides full protective coverage for brake pots, axles and air lines.
-
- Brake Drums
- Lightweight options available
-
- Disc Brakes
- Hendrickson MAXX22T air disc brakes
-
- Dual Chute Opening
- A second chute opening, shaft and crank on the opposite side from the primary chute opening
-
- Electric Remote Tarp Opener
- Electric wireless remote comes with a T210 handheld wireless remote control for opening your tarps along with a wall-mounted control box
-
- Full Close-Out Sheets
- Full close out sheets protect the area above the king pin section and suspension section from road grime and snow buildup. They also reduce drag by eliminating wind turbulence in those areas.
-
- Holland Kompensator Fifth Wheel
- The Holland Kompensator fifth wheel coupled with a grease bank relieves the twisting force between trailers in tight turns on uneven terrain.
-
- Hubodometer
- Available in either miles or kilometers
-
- Lift Axles
- Run-empty lift axles allow axles to be raised for no-load driving
-
- Lighting Packages
- 3 lighting packages available
-
- Loading & Unloading Lights
- LED loading and unloading lights are available
-
- Placard Holders
- Placard holders for dangerous goods labels
-
- Rounded Stainless Steel Fenders
- Stainless steel fenders wrap around the tire to prevent road debris being scattered by tires. The fenders are interconnected with a closure plate between them to protect the trailer.
-
- Stainless Steel Corners
- Stainless steel covers on front of lead and rear of pull protect the corners of the trailer from wear and tear and makes cleaning easier.
-
- Tire Inflation System
- Hendrickson TIREMAAX PRO
-
- Tires
- Bridgestone Options Available
-
- Tow Hooks
- Can also be used as a step.
-
- Vented Tarp Hoods
- The vented tarp hoods allow air to enter the trailer while unloading, should you forget to open your tarp.
-
- Vibrator Brackets
- Vibrator brackets are mounted to the hopper.
-
- Wheels
- 24.5" option available in aluminum or steel
-
-
-
- Auxiliary Air Supply
- An auxiliary air chuck can be installed inside the air gauge box to supply air for a pneumatic vibrator. This handy outlet can also be used to bring tire pressure up to recommended PSI.
-
- Brake Pot Belting Ahead of Suspension
- A 48.5" x 28" full-size flap can be installed in front of the first set of suspension hangers. This not only protects the hanger brackets but also provides full protective coverage for brake pots, axles and air lines.
-
- Brake Drums
- Lightweight options available
-
- Disc Brakes
- Hendrickson MAXX22T air disc brakes
-
- Dual Chute Opening
- A second chute opening, shaft and crank on the opposite side from the primary chute opening
-
- Electric Remote Tarp Opener
- Electric wireless remote comes with a T210 handheld wireless remote control for opening your tarps along with a wall-mounted control box
-
- Full Close-Out Sheets
- Full close out sheets protect the area above the king pin section and suspension section from road grime and snow buildup. They also reduce drag by eliminating wind turbulence in those areas.
-
- Holland Kompensator Fifth Wheel
- The Holland Kompensator fifth wheel coupled with a grease bank relieves the twisting force between trailers in tight turns on uneven terrain.
-
- Hubodometer
- Available in either miles or kilometers
-
- Lift Axles
- Run-empty lift axles allow axles to be raised for no-load driving
-
- Lighting Packages
- 3 lighting packages available
-
- Loading & Unloading Lights
- LED loading and unloading lights are available
-
- Placard Holders
- Placard holders for dangerous goods labels
-
- Rounded Stainless Steel Fenders
- Stainless steel fenders wrap around the tire to prevent road debris being scattered by tires. The fenders are interconnected with a closure plate between them to protect the trailer.
-
- Stainless Steel Corners
- Stainless steel covers on front of lead and rear of pull protect the corners of the trailer from wear and tear and makes cleaning easier.
-
- Tire Inflation System
- Hendrickson TIREMAAX PRO
-
- Tires
- Bridgestone Options Available
-
- Tow Hooks
- Can also be used as a step.
-
- Vented Tarp Hoods
- The vented tarp hoods allow air to enter the trailer while unloading, should you forget to open your tarp.
-
- Vibrator Brackets
- Vibrator brackets are mounted to the hopper.
-
- Wheels
- 24.5" option available in aluminum or steel
-
-
-
- Auxiliary Air Supply
- An auxiliary air chuck can be installed inside the air gauge box to supply air for a pneumatic vibrator. This handy outlet can also be used to bring tire pressure up to recommended PSI.
-
- Brake Pot Belting Ahead of Suspension
- A 48.5" x 28" full-size flap can be installed in front of the first set of suspension hangers. This not only protects the hanger brackets but also provides full protective coverage for brake pots, axles and air lines.
-
- Brake Drums
- Lightweight options available
-
- Disc Brakes
- Hendrickson MAXX22T air disc brakes
-
- Dual Chute Opening
- A second chute opening, shaft and crank on the opposite side from the primary chute opening
-
- Electric Remote Tarp Opener
- Electric wireless remote comes with a T210 handheld wireless remote control for opening your tarps along with a wall-mounted control box
-
- Full Close-Out Sheets
- Full close out sheets protect the area above the king pin section and suspension section from road grime and snow buildup. They also reduce drag by eliminating wind turbulence in those areas.
-
- Holland Kompensator Fifth Wheel
- The Holland Kompensator fifth wheel coupled with a grease bank relieves the twisting force between trailers in tight turns on uneven terrain.
-
- Hubodometer
- Available in either miles or kilometers
-
- Lift Axles
- Run-empty lift axles allow axles to be raised for no-load driving
-
- Lighting Packages
- 3 lighting packages available
-
- Loading & Unloading Lights
- LED loading and unloading lights are available
-
- Placard Holders
- Placard holders for dangerous goods labels
-
- Rounded Stainless Steel Fenders
- Stainless steel fenders wrap around the tire to prevent road debris being scattered by tires. The fenders are interconnected with a closure plate between them to protect the trailer.
-
- Stainless Steel Corners
- Stainless steel covers on front of lead and rear of pull protect the corners of the trailer from wear and tear and makes cleaning easier.
-
- Tire Inflation System
- Hendrickson TIREMAAX PRO
-
- Tires
- Bridgestone Options Available
-
- Tow Hooks
- Can also be used as a step.
-
- Vented Tarp Hoods
- The vented tarp hoods allow air to enter the trailer while unloading, should you forget to open your tarp.
-
- Vibrator Brackets
- Vibrator brackets are mounted to the hopper.
-
- Wheels
- 24.5" option available in aluminum or steel
-
-
#HaulWithDistinction
Own a Distinction? Tag your Distinction photos with #HaulWithDistinction on Instagram to have your photos featured here.
